Skip Navigation Website Accessibility



The MyMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones.

Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.

The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and -inch TRS outputs with plenty of drive for both.

Key Features

Blends any Microphone, Instrument and Stereo Source for Personal Monitoring Microphone Input and Thru with Pop-less On/Off Mute Switch. Passes Phantom Power for Operation with Condenser Microphones Instrument/Line Input and Thru Jacks Stereo Monitor Input with Blend Control Headphone output section has 1/8-inch and 1/4-inch Jacks High Performance, Low Noise Circuitry 9v battery and 12vDC Power Operation


Maximum Input Level+6 dBu (mic), +12 dBu (instrument),
+32 dBu (line), >+32 dBu (stereo monitor)
Input Impedance4.5k Ω (mic), 1m Ω (instrument),
100k Ω (stereo monitor, line)
Maximum Output Level+12dBu (headphones)
Maximum Gain47dB (mic), 41dB(instrument), 21dB(stereo monitor, line)
Output Impedance47 Ω (each headphone output)
Input ConnectionsXLR balanced microphone, 1/4-inch stereo monitor,
1/4-inch mono instrument/line input
Output ConnectionsXLR balanced microphone, 1/4-inch and 1/8-inch headphones, 1/4-inch mono instrument/line thru
Signal To Noise Ratio> 96dB
Power12VDC @ 150mA (Adaptor Included) or 9VDC Battery
Dimensions1.85″H x 4.6″W x 4.1″D (47mm x 117mm x 104mm)
Weight1.10 lbs (0.50kg)

Connors Music

    • 201 The Queensway S
    • Keswick, Ontario, Canada
    • L4P 2A3
    • (905) 476-3712

MON-THURS:  9:30am - 9:00pm
    • FRIDAY: 9:30am - 6:00pm
    • SATURDAY: 9:00am - 5:00pm
    • SUNDAY:     Closed